TEC AUTOMATISMES

Home Products Electro-aimants et ventouses Electromagnetic holding solenoids for fire protection VEM50R

Electro-aimants et ventouses

Print the card

VEM50R

Weight : 500 g.

Power supply : 24 or 48 VDC

Description

VOLTAGE CUT-OFF ELECTROMAGNETIC HOLDER MOUNTED IN A STEEL BOX

TEST REPORTS CNPP N° 95 00 01 AND 95 00 01 B

This material is generally linked to a fire system which will automatically release the fire doors in case of a fire, by switching the power off.

Holder mounted in a steel box painted with white epoxy, with cabled local release button, protection degree IP 42, delivered with an equipped keeper-plate (to choose when ordering) :

. PPE : equipped keeper-plate mounted in a fixed shock-absorbing support for angles < or = 10° - diameter 50 mm / coated with white zinc - mounting with 4 screws of 5 mm diameter.



. PPEO : equipped keeper-plate mounted on a rotating shock-absorbing support for angles < or = 60° - diameter 50 mm - coated with white zinc - mounting with 4 screws of 5 mm diameter.



Possibility of passing cables through the 18 mm diameter holes in the bottom of the box.

Available in simple box version or in a version equipped with a contact of door position (terminals for the contact of door position with 5 connection points).

Boxes can be directly mounted on the element to control (screws of 5 mm diameter) or mounted on supports with fixed or adjustable length, painted with white epoxy, for floor or wall mounting :



. SSML150 : fixed length 150 mm
. SSML250 : fixed length 250 mm
. SSML300 : fixed length 300 mm
. SSML400 : fixed length 400 mm
. SSMT150 : adjustable length from 150 to 250 mm
. SSMT250 : adjustable length from 250 to 350 mm
. SSMT300 : adjustable length from 300 to 400 mm
. SSMT400 : adjustable length from 400 to 500 mm
 

Please contact us for any complementary information
.

Dimensions

• Direct current

VEM50R - box dimension   VEM50R - side view
   

Technical features

Hold force 50 daN
Min. effort of detachment None (antiremanent ejector inside)
Standard voltages (Nom. Voltage ± 10%)
(others voltages on demand)
24 VDC - 48 VDC
Nominal power at 20°C 1,2 W
Connection Electrical connection with internal terminals equipped with pass-cables.

Non-contractual document - characteristics to be confirmed before order
TEC AUTOMATISMES reserves the right to modify description and specifications without notice

TEC Automatismes © 2019, Tous droits réservés | Agence web: mw